VEPTOR EDGE

#0167

Move the arm connection toward the edge of your portable monitor. Veptor Edge connects VESA to a 1/4-inch magic arm and adds about 3–5 inches of reach compared with a centered mount.

Order Now

Veptor Edge adapter with edge-positioned brass threaded inserts

Made for your mounting setup

Veptor Edge VESA adapter with an offset mounting point

1

More reach from the edge

Edge-located 1/4-inch mounting points offer about 3–5 inches more reach than a centered connection.

Veptor Edge VESA adapter with two raised edge mounts

2

VESA pattern options

Choose 75mm or 100+75mm patterns to suit your portable monitor.

3

Mounting configuration choices

(2) and (4) screw options for both 100mm and 75mm variants.

4

PETG and brass hardware

Glass-fiber PETG construction with brass 1/4-inch threaded inserts and thumbscrews.

Compatibility & questions

Which monitors is it intended for?

Portable monitors around 5–8 lb only. It is not intended for desktop monitors. Confirm the VESA pattern and the arm’s requirements before mounting.

How is it different from a centered mount?

Its mounting points sit toward the edge of the adapter, providing about 3–5 inches of additional reach compared with a centered mount.

What should I check before ordering?

Match the 75mm or 100+75mm pattern, two- or four-screw configuration, and mount angle to your setup. Monitor and arm are not included.